One year warranty, except for consumables, such as teflon pad,silicone pad,foam pad.
Description:
This heat transfer machine can transfer or pyrograph color designs or characters onto cotton,fiber etc.It can also be used in scald printing and vesicant printing,In a word,it is economical and practical.
Technical Parameter:
Transfer Size: 40*60cm
Voltage: 220V
Power: 2500W
Temperature range: 0-399°C
Time control range: 0-999Sec
Working Mode: Manual
Packing size: 67*68*44cm
Gross Weight: 31KG
Product Characteristics:
1.With electronic pointer thermostatic controller,the accuracy is higher(±2°C).
2.Integrating the heater and heater plate,it is safer and more servicealbe with even heating surface.
3.Adopt TEFLON as antiseize clad layer for heating pad.
4.Electric time control and signal indicator after process complete.
5.The pressure can be adjusted at any value.
6.Fix high temperature resistant froth silica gel,can bear maximum 350℃ without any distortion.
Set Operations:
1. Working temperature setting (temperature of baking & printing object):
Once the SET button is pressed, the foregoing picture will emerge, it will shows “” it indicates setting temperature, then the parameters can be adjusted by pressing ▼ or ▲.
2.Working time setting (time of baking & printing object):
Press the “SET” button second time, the foregoing picture will emerge. It shows “ ”, it indicates setting time, then the parameters can be adjusted by pressing ▼ or ▲.
3.Confirm temperature and time setting:
a.Press the SET button third times, it shows present temperature and the time setted. it indicates the temperature are rising.
b. When the setted temperature and time reached, pressing the heating plate down, begin printing, When the timing is over, the buzzer will sing. Lift up the handle of the heat press, and then retrieve the object and finish DIY gift printing.
4.Counter “zero” cleaning up setting:
Package:
Factory:
Application:
